-
KeepKleen® RDNMD
Product ID: RDNMDMetal-detectable food safe disposable gloves for accidental contamination detection
Our KeepKleen® RDNMD metal-detectable disposable gloves help reduce costs associated with accidental contaminations and food waste. A metal detector calibrated to standard sensitivity can detect pieces as small as 2 cm or 0.78 inches to prevent food waste shutdowns by adding and additional layer of control. They are CFIA and FDA compliant for safe food handling with texturized fingertips for steady grip.
-
SnowForce™ 635CRYO
Product ID: 635CRYOWaterproof protection for handling extremely cold cryogens
Designed for use around cryogens, these waterproof gloves are insulated with 3M Thinsulate™ which allows them to withstand contact with dry ice for 267 seconds. RaoTex™ inserts prevent cryogens from soaking through to the skin and act as an added insulator, trapping body heat while allowing moisture to escape. An extended cuff increases the area of protection while a looser fit allows for easy removal in the event of contact with cryogens.
-
Endura® 398OBPB
Product ID: 398OBPBMIG welding gloves with zoned hypodermic protection on thumb and index finger to guard against tungsten welding wire injuries
Our Endura® 398OBPB MIG welding gloves feature double-layered maximum ANSI 5 hypodermic puncture protection on the thumb and index finger on the off-hand to guard against common welding wire injuries. The off-hand glove also features a single-layer palm liner for additional ANSI 3 hypodermic puncture protection. Both off-hand and tool-hand gloves are lined with ParaActiv™ engineered yarn for 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection. Sewn with ParaActiv™ thread for added seam integrity and treated to resist water and liquids, these gloves feature padded palms and cuffs for comfort and protection when welding. Sold in left-handed (398OBPBLH) and right-handed (398OBPBRH) off-hand versions.
-
Endura® 378GKG4P
Product ID: 378GKG4PMulti-hazard FR protection with flexible maximum impact-resistant bumpers for hand movement plus cut and liquid protection
Our fire-resistant Endura® 378GKG4P gloves protect hands from multiple types of hazards, including arc flash, liquids, and cut risks plus their maximum impact protection is more flexible than typical comparable protection. Offering dual-hazard protection against flash fire and electrical arc flash, these gloves feature 4PRO™ back-of-hand bumpers for maximum ANSI 3 impact protection against knocks and bumps without sacrificing dexterity. ParaActiv™ engineered yarn liner provides 360° cut protection with high ANSI A5 cut resistance and are arc flash-rated level 3 with an ATPV of 35 cal / cm². They also feature padded palms for comfort when material handling and are treated to resist water and liquids.
-
SUPERA™ WCKVFR
Product ID: WCKVFRNon-irritating fire-resistant watch cap for protection against fire hazards
Our SUPERA™ WCKVFR watch cap is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this watch cap is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
SUPERA™ NWKVFR
Product ID: NWKVFRNon-irritating fire-resistant neck warmer for protection against fire hazards
Our SUPERA™ NWKVFR neck warmer is made with double-layer Kermel®-viscose blend to protect against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and arc flash-rated level 2 with an ATPV of 16 cal / cm², this neck warmer is suitable for workers in industries where fire hazards exist, such as construction, mining, and oil and gas.
-
SUPERA™ BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Superior® GLVBELTCLIP
Product ID: GLVBELTCLIPConvenient glove clips to keep hand protection near
Gloves that are out of reach are gloves that don’t get worn. These convenient clips can be fastened and worn on any belt loop to keep your gloves close by. They include a built-in magnetic breakaway that safely releases gloves in case of snags or catches, adding extra peace of mind.
-
Dragon™ TK835LG2
Product ID: TK835LG2Maximum heat protection with cut resistance plus 4-inch leather cuffs for wrist protection
Our Dragon™ TK835LG2 gloves offer maximum heat resistance with extended 4-inch leather cuffs for wrist safety when handling hot materials. The thick ParaActiv™ outer shell provides 360° cut protection with ANSI A5 cut resistance and and ANSI 5 heat protection with an inner cotton liner for comfort.
-
Cool Grip® TBMOB
Product ID: TBMOBFood safe heavyweight baker's mitts with maximum heat protection
Our Cool Grip® TBMOB baker’s mitts are food safe and help protect hands against heat hazards. Made from heavyweight cotton, they’ve been internally tested for protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C and are fully lined for extra comfort and insulation. Treated to resist water and liquids, these gloves feature reinforced thumb crotch for protection against wear and tear. They’re CFIA-compliant for safe hood handling.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated maximum heat protection with cut resistance for plastic injection molding
Our Cool Grip® SPGC/A insulated gloves offer cut resistance and heat protection for plastic injection molding. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection . An acrylic liner adds comfort while the glove-within-a-glove design traps air and provides reliable insulation.
-
Emerald CX® SCXPNTFC
Product ID: SCXPNTFCDouble-coated gloves for liquid protection and cut resistance
Our Emerald CX® SCXPNTFC gloves are double-coated cut protection for water and liquid resistance. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance while the full hand coating protects against liquid penetration. A double-layer ¾ micropore nitrile palm coating offers steady wet grip, making these gloves ideal for metal fabrication and glass manufacturing.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNSilicone-free low-linting hi-viz orange gloves with cut protection for hand placement and worker visibility
Our hi-viz orange TenActiv™ S18TAGGFN gloves are silicone-free and low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz orange shell for better hand visibility.
-
TenActiv™ S18TAGGFN
Product ID: S18TAGGFNSilicone-free low-linting hi-viz green gloves with cut protection for hand placement and worker visibility
Our hi-viz green TenActiv™ S18TAGGFN gloves are silicone low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz green shell for better hand placement and worker visibility.
-
TenActiv™ S18TAFGPU
Product ID: S18TAFGPUUltra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our TenActiv™ S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTLow-linting ultra-thin cut protection with specially formulated non-marring palm coating for longer wear life
Our low-linting TenActiv™ S18TAFGNT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend wear life. The non-marring nitrile palm coating provides steady wet grip that will not leave residue for product finishing. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and their ultra-thin construction improves freedom of movement with a bare-hand feel.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNUltra-thin and versatile cut protection for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Dexterity® S18KGFN
Product ID: S18KGFNUltra-thin silicone-free touchscreen compatibly for protection against minor cut hazards
Our ultra-thin Dexterity® S18KGFN gloves are silicone-free and provides touchscreen compatibility plus protection against minor cut hazards. ParaActiv™ engineered material offers 360° cut protection with ANSI A3 cut resistance. The foam nitrile palm coating offers a steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPULow-linting gloves to prevent contamination with incidental cut protection and tactile dry grip
Our TenActiv™ S15TAFGPU low-linting gloves offer low cut protection to protect hands from incidental cut hazards. TenActiv™ engineered yarn provides 360° cut protection with ANSI A3 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
-
Dexterity® S15NT
Product ID: S15NTEarth-friendly cotton gloves with biodegradable nitrile palm coating
Our earth-friendly Dexterity® S15NT gloves are made with cotton that is comfortable to wear and naturally biodegrades. The nitrile palm coating is made with biodegradable additives and offers a steady wet grip for general use.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
Superior Touch® S13WPPU
Product ID: S13WPPUWhite polyester low-linting gloves for food machine maintenance with non-marring palms that show dirt and contamination
Our food safe Superior Touch® S13WPPU white polyester gloves are low-linting and non-marring to detect and prevent contamination during food machine maintenance. Non-marring polyurethane palm coating offers better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. They are also CFIA-compliant for safe food handling.
-
TenActiv™ S13TAWFN
Product ID: S13TAWFNLatex-free maximum cut protection with wet grip for handling lightly oiled parts
Our latex-free TenActiv™ S13TAWFN gloves offer maximum cut protection and wet grip when handling lighly oiled parts. TenActiv™ engineered yarn material provides 360° cut protection with extreme ANSI A9 cut resistance. Made with latex-free materials to avoid allergic reactions, these gloves feature a foam nitrile hand coating for a steady wet grip.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
