-
SUPERA™ BAKVFR
Product ID: BAKVFRNon-irritating fire-resistant balaclava for protection against fire hazards
Our SUPERA™ BAKVFR is a balaclava made with double layer Kermel®- viscose blend, protecting against fire hazards. The fabric is soft and non-irritating, allowing for comfortable all-day wear. With its NFPA 70E compliance and ANSI CAT2; Ebt 16 cal/cm² rating, this balaclava is suitable for workers in industries where fire hazards exist such as construction, mining, and oil and gas.
-
Superior® GLVBELTCLIP
Product ID: GLVBELTCLIPConvenient glove clips to keep hand protection near
Gloves that are out of reach are gloves that don’t get worn. These convenient clips can be fastened and worn on any belt loop to keep your gloves close by. They include a built-in magnetic breakaway that safely releases gloves in case of snags or catches, adding extra peace of mind.
-
Dragon™ TK835LG2
Product ID: TK835LG2Maximum heat protection with cut resistance plus 4-inch leather cuffs for wrist protection
Our Dragon™ TK835LG2 gloves offer maximum heat resistance with extended 4-inch leather cuffs for wrist safety when handling hot materials. The thick ParaActiv™ outer shell provides 360° cut protection with ANSI A5 cut resistance and and ANSI 5 heat protection with an inner cotton liner for comfort.
-
Cool Grip® TBMOB
Product ID: TBMOBFood safe heavyweight baker's mitts with maximum heat protection
Our Cool Grip® TBMOB baker’s mitts are food safe and help protect hands against heat hazards. Made from heavyweight cotton, they’ve been internally tested for protection beyond maximum ANSI 5 standards for extreme heat resistance up to 752°F / 400°C and are fully lined for extra comfort and insulation. Treated to resist water and liquids, these gloves feature reinforced thumb crotch for protection against wear and tear. They’re CFIA-compliant for safe hood handling.
-
TenActiv™ STAGBPU
Product ID: STAGBPUBlack knit cut-resistant gloves that hide dirt and stains for longer wear life
Our TenActiv™ STAGBPU gloves are made from dark colored TenActiv™ engineered yarn to hide dirt and stains while protecting worker hands from cut hazards. The low-linting dark coloring allows these gloves to be used longer between laundering cycles, increasing their wear-life. They are ideal for work in unfinished or grimy environments where dirt is visible. Featuring moderate 360° cut protection with ANSI A4 cut resistance and polyurethane dipped palms for dry grip, they balance protection and comfort with a bare hand feel and dexterity.
-
Cool Grip® SPGC/A
Product ID: SPGC/AInsulated maximum heat protection with cut resistance for plastic injection molding
Our Cool Grip® SPGC/A insulated gloves offer cut resistance and heat protection for plastic injection molding. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and ANSI 4 heat protection . An acrylic liner adds comfort while the glove-within-a-glove design traps air and provides reliable insulation.
-
Emerald CX® SCXPNTFC
Product ID: SCXPNTFCDouble-coated gloves for liquid protection and cut resistance
Our Emerald CX® SCXPNTFC gloves are double-coated cut protection for water and liquid resistance. ParaActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance while the full hand coating protects against liquid penetration. A double-layer ¾ micropore nitrile palm coating offers steady wet grip, making these gloves ideal for metal fabrication and glass manufacturing.
-
TenActiv™ S18TAGOFN
Product ID: S18TAGOFNSilicone-free low-linting hi-viz orange gloves with cut protection for hand placement and worker visibility
Our hi-viz orange TenActiv™ S18TAGGFN gloves are silicone-free and low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz orange shell for better hand visibility.
-
TenActiv™ S18TAGGFN
Product ID: S18TAGGFNSilicone-free low-linting hi-viz green gloves with cut protection for hand placement and worker visibility
Our hi-viz green TenActiv™ S18TAGGFN gloves are silicone low-linting, offering cut protection plus worker visibility and hand placement. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance. Their foam nitrile palms are non-marring and offer a steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel. They also feature a hi-viz green shell for better hand placement and worker visibility.
-
TenActiv™ S18TAFGPU
Product ID: S18TAFGPUUltra-thin moderate cut protection for better hand movement with a bare hand feel and dry grip
Our TenActiv™ S18TAFGPU gloves protect against cut hazards and offer a bare hand feel with dry grip and outstanding dexterity. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance, while their polyurethane palm coating offers steady dry grip and tactile feel. Ideal for small parts handling, their white shell helps spot dirt and contamination.
-
TenActiv™ S18TAFGNT
Product ID: S18TAFGNTLow-linting ultra-thin cut protection with specially formulated non-marring palm coating for longer wear life
Our low-linting TenActiv™ S18TAFGNT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend wear life. The non-marring nitrile palm coating provides steady wet grip that will not leave residue for product finishing. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance and their ultra-thin construction improves freedom of movement with a bare-hand feel.
-
TenActiv™ S18TAFGFN
Product ID: S18TAFGFNUltra-thin and versatile cut protection for a wide range of tasks
Our versatile TenActiv™ S18TAFGFN gloves are ultra-thin and CFIA compliant with features for a wide range of operations. Made from static dissipative TenActiv™ engineered yarn to protect microelectronics, they provide 360° cut protection with moderate ANSI A4 cut resistance while their foam nitrile palms are non-marring and offer steady wet grip. The ultra-thin construction improves hand movement while providing a bare hand feel.
-
Dexterity® S18KGFN
Product ID: S18KGFNUltra-thin silicone-free touchscreen compatibly for protection against minor cut hazards
Our ultra-thin Dexterity® S18KGFN gloves are silicone-free and provides touchscreen compatibility plus protection against minor cut hazards. ParaActiv™ engineered material offers 360° cut protection with ANSI A3 cut resistance. The foam nitrile palm coating offers a steady wet grip and are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S15TAFGPU
Product ID: S15TAFGPULow-linting gloves to prevent contamination with incidental cut protection and tactile dry grip
Our TenActiv™ S15TAFGPU low-linting gloves offer low cut protection to protect hands from incidental cut hazards. TenActiv™ engineered yarn provides 360° cut protection with ANSI A3 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
-
Dexterity® S15NT
Product ID: S15NTEarth-friendly cotton gloves with biodegradable nitrile palm coating
Our earth-friendly Dexterity® S15NT gloves are made with cotton that is comfortable to wear and naturally biodegrades. The nitrile palm coating is made with biodegradable additives and offers a steady wet grip for general use.
-
Chemstop™ S15KGV30N
Product ID: S15KGV30NChemical gloves with cut protection and nitrile coating for better wet grip
Our Chemstop™ S15KGV30N gloves offer reliable protection from cut hazards and chemical exposure. Red PVC coating guards against chemicals and solvents while a black nitrile full hand coating resists oil, ensuring a steady wet grip. ParaActiv™ engineered yarn liner that provides 360° cut protection with high ANSI A5 cut resistance and ANSI 2 heat protection.
-
Superior Touch® S13WPPU
Product ID: S13WPPUWhite polyester low-linting gloves for food machine maintenance with non-marring palms that show dirt and contamination
Our food safe Superior Touch® S13WPPU white polyester gloves are low-linting and non-marring to detect and prevent contamination during food machine maintenance. Non-marring polyurethane palm coating offers better dry grip and tactile feel that will not leave a residue, making them ideal for glassware and small parts handling. They are also CFIA-compliant for safe food handling.
-
TenActiv™ S13TAWFN
Product ID: S13TAWFNLatex-free maximum cut protection with wet grip for handling lightly oiled parts
Our latex-free TenActiv™ S13TAWFN gloves offer maximum cut protection and wet grip when handling lighly oiled parts. TenActiv™ engineered yarn material provides 360° cut protection with extreme ANSI A9 cut resistance. Made with latex-free materials to avoid allergic reactions, these gloves feature a foam nitrile hand coating for a steady wet grip.
-
TenActiv™ S13TAPUCF
Product ID: S13TAPUCFElectrostatic dissipative cut protection plus touchscreen compatibility for work with microelectronics
Our cut-resistant Superior Touch® S13TAPUCF gloves offer electrostatic dissipative properties that ground energy and are touchscreen compatible. TenActiv™ engineered yarn provides 360° cut protection with ANSI A2 cut resistance. Ideal for working with electronics, they are made with carbon filament for electrostatic dissipative properties to ground energy and prevent static charges from building up. They feature a polyurethane palm coating for a better dry grip and tactile feel, plus are touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S13TANT
Product ID: S13TANTCut protection with specially formulated non-marring palm coating for durability and longer wear life
Our TenActiv™ S13TANT gloves feature a specially formulated nitrile palm coating for better abrasion resistance to extend their wear life. Made from TenActiv™ engineered yarn, they provide 360° cut protection with ANSI A4 cut resistance while the nitrile palm coating provides steady wet grip that is touchscreen compatible to seamlessly move between tasks.
-
TenActiv™ S13TAGPU
Product ID: S13TAGPUNon-marring low-linting gloves for incidental cut protection plus tactile dry grip that won't leave residue
Our TenActiv™ S13TAGPU low-linting gloves offer low cut protection with non-marring palms for better dry grip and tactile feel that will not leave residue. TenActiv™ engineered yarn provides 360° cut protection with ANSI A2 cut resistance, plus a polyurethane palm coating for steady dry grip and tactile feel. They’re low-linting to avoid shedding material and prevent contamination.
-
TenActiv™ S13TAFNT
Product ID: S13TAFNTEconomic choice latex-free cut resistance with touchscreen compatibility and steady wet grip
Our TenActiv™ S13TAFNT gloves are an economic choice for cut resistance with touchscreen compatibility and steady wet grip for handling lightly oiled parts. TenActiv™ engineered yarn provides 360° cut protection with ANSI A4 cut resistance and is latex-free to reduce risk of allergies. Foam nitrile palm coating provides steady wet grip and is touchscreen compatible to seamlessly move between tasks.
-
Superior Touch® S13SXPUQ
Product ID: S13SXPUQEconomical low-lint gloves for incidental cut protection and non-marring palms to prevent contamination
Our Superior Touch® S13SXPUQ low-linting gloves with non-marring palms are an economical choice for cut protection against incidental hazards. White Dyneema® material offers 360° cut protection with low ANSI A2 cut resistance and will show dirt or other contaminates. Low-linting with non-marring polyurethane palm coating provides better dry grip that will not leave residue, making them ideal for handling sensitive material like glass.
-
TenActiv™ S13TAFGPU
Product ID: S13TAFGPULow-linting cut resistance to prevent contamination plus steady dry grip and better touch sensitivity
Our low-linting TenActiv™ S13TAFGPU gloves offer cut resistance plus a steady grip with better sense of touch that prevents shedding to avoid contamination. TenActiv™ engineered yarn provides 360° cut protection with ANSI A5 cut resistance and a polyurethane palm dip coating provides steady dry grip and tactile feel.
Superior Glove™, a leading Manufacturer & Wholesale Supplier of Work & Safety Gloves & Arm Sleeves. FREE SAMPLES. Wide Variety of Styles & Materials.
